Your Floors Deserve More Than a Mop
Dull, yellowed floors make even a tidy facility look tired, and no amount of mopping fixes it. Years of wax, soil, and product residue build up in layers a mop and bucket cannot touch. That buildup traps dirt in the finish and dims the whole room. The only real fix is to strip the floor back to bare, deep-clean the surface, and lay down fresh coats of professional-grade finish. Clean Bright Portland brings floor stripping and waxing in Portland to offices, clinics, factories, restaurants, schools, religious centers, and retail stores across the metro and SW Washington. We use eco-friendly chemistry and state-of-the-art equipment, schedule after-hours so you lose no business time, and stand behind every job with our 24-hour make-it-right promise. Locally owned and operated for 10 years, licensed and insured.
The Full Strip and Wax Process
Three steps, done in sequence. Every step matters for a result that lasts. We do not skip the strip, we do not cut corners on dry time, and we do not stop at one coat.
Strip
We apply a professional-grade stripper that breaks down and lifts old wax, finish buildup, and embedded grime from the surface. This is the step most in-house cleaning skips, and it is why floors that get mopped regularly still look dull. You cannot lay good finish over a bad foundation.
- Stripping solution applied and worked into the finish
- Rotary floor machine with stripping pad lifts old wax
- Solution and stripped finish wet-vacuumed and mopped away
- Edges and corners stripped by hand with detail tools
- Second strip pass on heavily built-up areas
- Floor inspected and approved before the next step
Deep Clean
Once the old wax is off, we thoroughly scrub the bare floor to remove any remaining residue, soil, and discoloration before the new finish goes down. This step determines the final appearance of the wax coat, so we do not rush it.
- Neutral, eco-friendly cleaner worked into the bare floor
- Auto-scrubber pass for even, thorough cleaning
- Surface pores scrubbed clean of trapped soil
- All cleaner residue rinsed and removed
- Floor allowed to dry fully before finish application
- Visual inspection of surface quality before waxing
Wax & Finish
We apply multiple thin coats of commercial-grade floor finish, letting each coat dry fully before the next. Thin coats bond properly and build to a deep, durable gloss. We close with a high-speed burnish to bring the surface to full shine.
- Commercial-grade finish applied in thin, even coats
- Minimum 3 to 5 coats depending on floor condition
- Each coat allowed to dry fully before the next
- Edges and corners coated by hand for full coverage
- High-speed burnishing for maximum gloss and durability
- Final inspection and touch-up before handover
If you are not satisfied with the finish, tell us within 24 hours and we return to address it at no extra charge. Our floor work is backed by the same walk-through satisfaction promise we apply to every service.
Floor Types We Restore
Different surfaces need different chemistry and technique. We match the process to the floor every time.
VCT (Vinyl Composition Tile)
The most common commercial floor. VCT is porous and needs regular strip and wax to hold its appearance and durability. Without it, the surface oxidizes, yellows, and traps dirt in the pores no matter how often it is mopped.
Luxury Vinyl Plank & Tile
LVP and LVT need a specific low-buildup finish, not traditional floor wax. We use the correct product for the surface so you get gloss and protection without clouding or peeling.
Linoleum
Natural linoleum responds well to proper stripping and finishing when it is done right. We use pH-neutral chemistry and the correct pad abrasion to avoid surface damage.
Sealed Concrete & Tile
Polished concrete and tile do not take wax the same way, but they still benefit from deep cleaning and the correct protective treatment. We match the process to the surface as part of a full floor-care program.